5. Set and start the correct programme
for the type of load and the degree of
soil.
7.1 Using the detergent
20
30
A
B
C
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment
(A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
7.2 Setting and starting a
programme
Setting mode
The appliance must be in setting mode to
accept some operations.
The appliance is in setting mode when,
after the activation, all the programme in-
dicators come on.
If the control panel shows other condi-
tions, press and hold function buttons (B)
and (C) at the same time until the appli-
ance is in setting mode.
Starting a programme without
delay start
1.
Open the water tap.
2.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3.
Press the button of the programme
you want to set.
•The related programme indicator
stays on.
• All the other programme indicators
go off.
4.
Close the appliance door. The pro-
gramme starts.
Starting a programme with delay
start
1. Set the programme.
2. Press the delay button again and
again until the indicator of the number
of hours you want to set comes on.
You can set 3, 6 or 9 hours.
• The delay indicator comes on.
3.
Close the appliance door. The count-
down starts. When the countdown is
completed, the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
Press and hold function buttons (B) and
(C) at the same time until the delay indica-
tor goes off and all the programme indica-
tors come on.
When you cancel a delay start, the
appliance goes back to setting
mode. You have to set the pro-
gramme again.
Cancelling the programme
Press and hold function buttons (B) and
(C) at the same time until all the pro-
gramme indicators come on.
10
www.electrolux.com
