3. Use and to set the desired
delay time. The delay is adjustable
from 1 to 24 hours.
The starting time and the ending time of
the programme are updated accordingly.
4. Press to start the countdown.
During the countdown, it is possible to
change the delay time but not to change
the programme and options.
When the countdown is completed, the
programme starts.
How to cancel the delay start
while the countdown operates
1. Open the appliance door.
2. Press .
The display shows the current setting of
the delay start.
3. Press until you reach 0h.
The starting time of the programme is
changed to now. The ending time is
updated accordingly.
4. Press
.
The display shows: Cancel delay and
two values.
• Yes: select the value to cancel
the delay and to start the
programme.
• No: select the value to resume
the countdown.
5. Press to confirm. Close the
appliance door.
It is also possible to cancel the delay
start by following the procedure for
cancelling the running programme. In
this case, the selected programme and
the options are set to their default values.
How to cancel the running
programme
1. Open the appliance door.
2. Press and hold for about 3
seconds. The display shows: Cancel
washing? and two values.
• Stop: select the value to cancel
the running programme. Press
to confirm.
• Resume: select the value to
resume the running programme.
Press to confirm. Close the
appliance door.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry function.
End of the programme
When the programme is complete, the
display shows: 0:00 and End of
program.
All segments of the programme bar are
on with fixed light.
1. Press the on/off button or wait for the
Auto Off function to automatically
deactivate the appliance. If you open
the door before the activation of Auto
Off, the appliance is automatically
deactivated.
2. Close the water tap.
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
www.electrolux.com16
