9.1 Using the detergent
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.2 Setting and starting a
programme
How to start a programme
1. Press the on/off button to activate the
appliance.
The display shows the programme list.
2. Close the appliance door.
3. Select a programme. ECO 50° is
always the default programme.
4. Set applicable options if desired.
Once the options are set, return to
the programme list.
5. Press to start the programme.
If the programme is applicable to the
TimeManager option, the display shows
two values with corresponding
programme durations.
• Fast: select the value and press
to activate TimeManager.
• Normal: select the value and
press to deactivate
TimeManager.
The programme starts. The display
shows the following information:
• The programme duration which
counts down in minutes.
• The symbol of the running
programme.
• The programme bar.
The programme bar
indicates the progress of the
wash cycle. At the begging
of the cycle, the middle
segment of the bar is on with
fixed light and the lateral
segments are flashing. The
number of the segments with
fixed light increases as the
programme duration
decreases. At the end of the
cycle, all segments are on
with fixed light.
How to start the MyFavourite
programme
1. Press the on/off button to activate the
appliance.
2. Close the appliance door.
3. Press
.
The programme starts.
How to delay the start of a
programme
It is not possible to delay the start of the
MyFavourite programme.
1. Set a programme.
2. Press .
The display shows the following
information:
• Start and the time at which the
programme will start.
• End and the time at which the
programme will be complete.
• The time slider for setting the
delay time.
ENGLISH 15
