Water supply
1)
Cold water or hot water
2)
max. 60 °C
Capacity Place settings 14
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
2)
If the hot water comes from alternative sources of energy, (e.g. solar panels, wind turbine
energy), use the hot water supply to decrease energy consumption.
12. INSTALLATION
12.1 Fitting under a kitchen
counter
The plinth of a freestanding appliance is
not adjustable.
Do not remove the appliance worktop if
you want to use it as a freestanding unit.
It is not necessary to remove the worktop
when installing under a standard kitchen
counter.
Only remove the appliance worktop to in-
stall it under a close fitting sink unit or
kitchen counter (820 mm).
min 570 mm
600 mm
820 mm
1.
Put the appliance adjacent to
a water tap and a water drain.
2.
Make sure that the dimensions
of the recess agree with the di-
mensions in the figure.
Removing the worktop
4
3
2
1
3.
Remove the rear screws (1).
4.
Pull the worktop from behind
(2).
5.
Lift the worktop and move it
from the front slots. (3)
6.
Level the appliance using the
adjustable feet.
7.
Install the appliance under the
kitchen counter.
18
www.electrolux.com
