23
Setting or Changing the Start Delay
Timer
Using the start delay timer you can adjust when the
wash programme is to begin within the next 19 hours.
Setting the start delay timer:
1. Press the ON/OFF button a.
2. Keep pressing the DELAY TIMER button
ñ until
the number of hours of delay until the wash pro-
gramme is to start are flashing on the multi-dis-
play.
3. Press the button for the desired wash programme.
The multi-display now displays the number of
hours without flashing. The number of hours is
saved.
4. The wash programme starts automatically at the
end of the delay set.
Changing the start delay:
As long as the wash programme has not started, you
can still change the start delay set by pressing the
DELAY TIMER button
ñ .
Switching Off the Dishwasher
Only switch the dishwasher off when the multi-display
indicates "0" remaining programme time.
1. Press the ON/OFF button
M. The ON/OFF but-
ton
M indicator extinguishes.
1
Hot steam may escape from the appliance
when opening the door immediately after the
end of the programme. Therefore:
2. Open the door carefully.
Emptying the Dishwasher
3
• Hot dishes are sensitive to knocks. The dishes
should therefore be allowed to cool down before
removing them from the appliance.
• Leave the dishes in the dishwasher for approx.
15 minutes after the end of the programme so that
they dry better and can cool down.
• First empty the lower rack, and then the upper
rack. By using this procedure you will avoid any
water that may be remaining in the upper rack,
dripping onto the dishes in the lower rack and
leaving water marks.
