3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP
Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting, and it is recommended to use it. By default, the IP-2000VPN will act as a
DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IP-2000VPN.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the following changes.
5. The Default Gateway must be set to the IP address of the IP-2000VPN. To set this:
• Click the Advanced button on the screen above.
• On the following screen, click the Add button in the Gateways panel, and enter the IP-2000VPN’s IP
address, as shown in below.
• If necessary, use the Up button to make the IP-2000VPN the first entry in the Gateways list.
AirLive IP-2000VPN User’s Manual
163
