3. Click on the Properties button. You should then see a screen like the following.
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows
setting, and it is recommended to use it. By default, the IP-2000VPN will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IP-2000VPN.
Using "Specify an IP Address"
If your PC is already configured, check with your network administrator before making the following changes:
• On the Gateway tab, enter the IP-2000VPN's IP address in the New Gateway field and click Add, as
shown below. Your LAN administrator can advise you of the IP Address they assigned to the
IP-2000VPN.
AirLive IP-2000VPN User’s Manual
161
