Programme Type of soil Type of load Programme description
4)
Normal soil Crockery and cutlery Prewash
Wash 50 °C
Rinses
Dry
1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme time.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test
information.
4) This is the most silent washing programme. The pump works at a very low speed to decrease the level of noise.
Because of the low speed, the programme time is long.
Consumption values
Programme
1)
Energy (kWh) Water (litre)
0,9 - 1,7 8 - 15
1,5 - 1,6 13 - 14
0,9 9
0,9 - 1,0 9 - 11
0,8 - 0,9 11 - 12
1,0 - 1,2 10 - 11
1,1 - 1,2 9 - 11
1) The display shows the programme time.
The water pressure and temperature, the variations of the mains supply and the quantity of
dishes can change the consumption values.
SETTING AND STARTING A WASHING PROGRAMME
Starting the washing programme without delay start
You can set the washing programme with the appliance door open or closed.
If the door is open, you can change the setting because the appliance starts to operate only
after you close the door.
If the door is closed, the appliance starts to operate after 3 seconds from the setting of the
washing programme.
1. Activate the appliance. Make sure that the appliance is in setting mode.
2. Set the washing programme.
• The related programme indicator comes on.
Setting and starting a washing programme
77
