9
To locate the IPEI from the phone’s UI (5020 handsets):
1. Turn on the handset.
2. Press Menu.
3. Select Status and then select Firmware version.
4. Press Exit to exit the menu.
To locate the IPEI on the phone:
1. Remove the back cover of the battery compartment.
2. Remove the battery if it is already inserted.
3. Underneath the battery slot you will see a label with the serial number. Record the serial
number, omitting the last digit so you will get a 12-digit number.
Configuring the DECT System on the KWS600v3
1. Under the Configuration menu, select DECT, and then select System.
2. In the Name field, the name must always be DECT.
3. In the PWD (password) field, enter the word DECT then enter it again in the field below.
4. From the Subscription list, select either With System AC or With User AC.
NOTE: System AC allows you set a system-wide password for subscribing handsets. User
AC allows you to set the password on a per-user basis.
5. If the With System AC is selected from the Subscription list, enter a numerical access code
in the AC field (for example, 3179). You will enter this code when registering new handsets
to the base station.
6. From the Tones list, select the appropriate ringtone for your region.
7. Select Enbloc Dialing.
8. From the General Encoder Preference and Local Network Coder dropdown lists, ensure
that G711u is the selected CODEC.
9. Select OK.
