3
To change the IP address of your computer for Windows Server 2003/Windows XP:
1. Select Start > Control Panel.
2. If you have the classic view, double-click Network Connections. If you have the category view,
double-click Network and Internet Connections, and then select Network Connections.
3. Double-click your active LAN or Internet connection.
4. Select Properties.
5. In the General tab, highlight the Internet Protocol (TCP/IP) item, and select Properties.
6. In the General tab, select Use the following IP address, and enter:
IP address: 192.168.1.2
Subnet mask: 255.255.255.0
7. Select OK.
Changing the IP Address on the KWS600v3
New (or factory reset) KWS600v3s are configured with a static IP address. This must be changed so that
the device can communicate on your network.
To change the wireless server’s IP address:
1. Open your browser and enter the IP address of the KWS600v3. The factory default is
192.168.1.1.
2. When prompted, use the following default Web access username and password:
Web Access Username: admin
Web Access Password: ip1200
3. Under the Configuration menu, select ETH0.
4. Configure the device for Dynamic Host Configuration Protocol (DHCP) or a static IP address.
To configure the device for DHCP:
Select on DHCP under the ETH0 configuration menu.
From the Mode list, select Client and then select OK.
Select Reset (under the Administration menu) to save your configuration.
To configure a static IP address:
Select DHCP under the ETH0 configuration menu.
From the Mode list, select Disabled and then select OK.
Select Reset (under the Administration menu) to save your configuration.
