2-6
Chapter 2
Programming Procedures
500: SYSTEM
–
WIDE COUNTERS Alarm Rem Cntr=5
Auto Rdl Counter=5
DISA Call Cntr=99
DISA Lock Cntr=3
New Call Counter=99
UCD Visual Alarm=0
UCD Audio Alarm=0
UCD CS Level 1=0
UCD CS Level 2=0
501: SYSTEM
–
WIDE TIMERS SEE MMC 501
502: STATION
–
WIDE TIMERS SEE MMC 502
503: TRUNK
–
WIDE TIMERS SEE MMC 503
504: PULSE MAKE/BREAK RATIO Make/Break = 33
Pulses Per Second = 10
505: ASSIGN DATE AND TIME Follows software version release data
506: TONE CADENCE SEE MMC 506
507: ASSIGN AUTO NIGHT TIME None
508: CALL COST UNIT COST PER MP: 200
PENCE
CALL COST RATE: 100%
510: SLI RING CADENCE SEE MMC 510
512: ASSIGN HOLIDAY None
600: ASSIGN OPERATOR GROUP DAY:500 NIGHT:500
601: ASSIGN STATION GROUP SEE MMC 601
602: STATION GROUP NAME None
603: ASSIGN TRUNK GROUP All analogue trunks are in group 9
All digital trunks are in group 80
604: ASSIGN STATION TO PAGE ZONE No stations assigned
All zone is set
605: ASSIGN EXTERNAL PAGE ZONE None
606: ASSIGN SPEED BLOCK System: 200 entries(20 blocks)
Stations: One bin of 10 entries
(1 block)
607: UCD OPTIONS SEE MMC 607
608: ASSIGN CLIP REVIEW BLOCK One bin of 10 entries
700: COPY COS CONTENTS None
701: ASSIGN COS CONTENTS SEE MMC 701
702: TOLL DENY TABLE All entries are set to 0
703: TOLL ALLOWANCE TABLE All entries are set to 0
704: ASSIGN WILD CHARACTER All entries are set to 0
705: ASSIGN SYSTEM SPEED DIAL None
706: SYSTEM SPEED DIAL BY NAME No names
707: AUTHORISATION CODE COS: 01
Technical Manuals Online! - http://www.tech-man.com
