Rev: 10102000
5
l Place the DI-707 on a flat horizontal surface.
l Keep the DI-707 away from excessive heat.
l Do not place the DI-707 in a dusty or wet environment.
The recommended operational specifications of DI-707 are:
Temperature 5
o
C ~ 55
o
C
Humidity 10 % ~ 90 %
In addition, remember to turn off the power, remove the power cord from the outlet, and keep
your hands dry when you install the DI-707.
2.3. Procedure for Hardware Installation
1. Setup LAN connection: connect an Ethernet cable from your computer’s Ethernet port
to one of the LAN ports of the DI-707.
Figure 2-5 Setup of LAN connections for DI-707.
2. Setup WAN connection: prepare an Ethernet cable for connecting the DI-707 to your
cable/xDSL modem or Ethernet backbone. Figure 2-5 illustrates the WAN connection.
3. Connecting DI-707 with other hubs:
In case you need not to connect with another hub, skip this step.
If you want to connect DI-707 with another hub, connect one of the ports 1-7 to that hub
