J PILE HEIGHT SELECTION AND SETTING
To select a pile height setting:
Make sure vacuum cleaner is OFF. Select
a pile height setting by tilting the vacuum
cleaner back untit the front wheels are
lifted slightly off the floor.
Slide the adjustment lever to the correct
setting.
There are four (4) pile height settings on
the vacuum cleaner. Use the LOW setting
for most low-pile carpets and bare floor
cleaning. Use the HIGH setting for
high-pile carpets like shag carpet, scatter
rugs, etc. Use the other settings as
needed for carpet heights in between.
Suggested settings are:
HI - Shag, deep pile, or scatter rugs.
* - Medium to deep pi|e.
* - Low to medium pile.
LO - Most carpets, bare floors, combined
with Carpet Bare floor Selector setting,
delicate carpets that require agitator to
be turned off.
A CAUTION
Do notallow vacuum cleaner to remain in
one spotfor any lengthof time when the
agitator isturning,Damage to carpet may
OCCUr.
