HI
Please pay special attention to these hazard alert boxes, and follow any
_i instructions given. WARNING statements alert you to such hazards as fire, electric
shockt burns and personal injury. CAUTION statements alert you to such hazards
as personal injury and/or property damage.
_IbWARNING
Electrical Shock Hazard
Do not plug into the electrical supply
until the assembly is complete. Failure
to do so could result in electrical shock
or injury.
u i i, UUUlllJu
Before assembling the vacuum cleaner,
check the PACKING LIST (page 2). Use
this list to verify that you have received
all the components of ,/our new Kenmore
vacuum cleaner.
HANDLE ASSEMBLY
Remove the combination brush from the
handle to expose the handle mounting hole.
Remove the handle screw from the body
of the vacuum cleaner.
Position the handle assembly as shown in
the illustration below.
When installing the handle, firmly press
the handle onto the body. Secure with
handle screw provided.
Begin to tighten the screw with your
fingers. It may be necessary to adjust the
handle slightly.
Using a screwdriver, tighten handle screw.
Do not overtighten.
Reinstall combination brush,
Handle
Assembly _, ! _ !
Combination
Brush _ _.
Handle Screw Here
Ret]3ove
Handle Electrical
Screw Connection
ii!,
_I_CAUTION
Do not overtighten.
Overtightening could strip the screw
holes.
Do not operate the vacuum cleaner
wilhout the screw in place.
CORD ASSEMBLY
Make sure the quick release upper cord
hook is in the upright position. Remove the
wire tie from the power cord.
Quick
Release )_ I_
Power Illlll It_i\_I1\tC_ Cord
oo, --111t!11
Lower IIItlL,_ J!ltlL,_"_
CordHook//lt_t"F!ll!lii'/_
Wrap the power cord around the quick
release cord hook and the carrying handle,
Lock the power cord plug onto the power
cord.
