KRAMER: SIMPLE CREATIVE TECHNOLOGY
The 707 and 708 Video Audio Line Transmitter and Receiver
6
4.2 Your 708 Video Audio Line Receiver
Figure 2 and Table 2 define the 708:
Figure 2: 708 Video Audio Line Receiver
Table 2: 708 Video Audio Line Receiver Features
# Feature Function
1 VIDEO OUT BNC Connector Connect to the composite video acceptor
2 EQ Trimmer Turn to adjust the output signal level
1
3 VIDEO GAIN Trimmer Turn to adjust the output signal equalization
1
4 AUDIO OUT RCA Connector
Connect to the unbalanced mono audio acceptor
5 TERM Push Button When pressed, terminates the unit that is the last in
the line (not looped)
6 INV Push Button When pressed, inverts the incoming video signal
7 LOOP RJ-11 Connector Connect to the LINE IN terminal block of an additional
708 to increase the number of outputs
8 LINE IN RJ-11 Connector
Connect to the LINE OUT connector of the 707
9 ON LED Lights when receiving power
10 12V DC +12V DC connector for powering the unit
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
