The 707 and 708 Video Audio Line Transmitter and Receiver
7
4.3 Connecting the 707/708 Video Audio Line Transmitter/Receiver
You can use the 707 and 708 to configure a video audio line transmitter and
receiver system.
To connect the 707 Video Audio Line Transmitter with the 708 Video Audio
Line Receiver, as illustrated in the example in Figure 3, do the following:
1. Connect a composite video source (for example, a video player) to the VIDEO
IN BNC connector of the 707.
2. Connect an unbalanced mono audio source (for example, the audio
output of the video player
1
) to the AUDIO IN RCA connector of the
707.
3. Connect the VIDEO OUT BNC connector of the 708 to a composite
video acceptor (for example, a display).
4. Connect the AUDIO OUT RCA connector of the 708 to an unbalanced
mono audio acceptor (for example, an amplifier with speakers).
5. Connect the LINE OUT RJ-11 connector of the 707 to the LINE IN RJ-11
connector of the 708, via twisted pair cabling.
6. If required, connect the LOOP RJ-11 connector to the LINE IN RJ-11
connector of an additional 708 unit.
7. On each 707 / 708 unit, connect a 12V DC power adapter to the power socket
and connect the adapter to the mains electricity (not illustrated in Figure 3).
8. If required, adjust the AUDIO LEVEL on the 707 and the EQ
(equalization) and VIDEO GAIN levels on the 708, by inserting a
screwdriver into each of the small holes and carefully rotating them.
1 Alternatively, you can connect a condenser microphone and press the COND. MIC push button
