35
AUDIOLINE FF895-2 REMOTE ACCESS
REMOTE ACCESS MODE
To enter the remote access mode, do the following:
# Call your phone from a tone dialling telephone.
# When you hear the greeting, enter the 3-digit security code (default is 123). As a safe
guard the system will only allow a max. of 10 digits to access the machine (no more
than 3 attempts).
# "Please enter next command" will be heard in the earpiece.
# Enter the control code within 10 seconds (from the table below).
# To exit the remote control mode, hang-up the phone or press the [#] button.
REMOTE CONTROL CODES
To Press
Access general mailbox *0
Access mailbox 1 *1
Access mailbox 2 *2
Access mailbox 3 *3
Playback message 51
Playback new message 52
Stop current message 3
Skip current message 6
Repeat current message 4
Playback OGM1 11
Playback OGM2 21
Record a new OGM1 12 start recording after beep
Record a new OGM2 22 start recording after beep
Turn on/off the answering function 8 the system announces if the status is on/off
Record memo 7
Delete message being played back 9 during message playback
Delete all old messages 99 when system is idle
Exit remote control #
NOTE: Approximately every 2 minutes during playback you will need to re-enter your security code.
