8
AUDIOLINE FF895-2 TELEPHONE
MAKING A CALL WITH THE SPEAKERPHONE
If you wish to make a call using the base unit do the following:
# Press the [SPEAKER] button and wait for dial tone (“SP” will show on the display)
# Dial the telephone number. When the number answers, speak using the microphone
on the base unit.
# To terminate the call, press the [SPEAKER] button.
SPEAKERPHONE VOLUME
You can change the volume of the speakerphone by pressing the Volume UP or Volume
DOWN control buttons on the base unit (the display will show "00" for the lowest setting
and "15" for the maximum setting).
SPEAKERPHONE MUTE
If you wish to converse with a third party privately simply press the [MUTE] button. Press
the [MUTE] again to continue the conversation (“SP”will flash in the display and a beep
will be heard every 15 seconds).
ANSWERING INCOMING CALLS
When an external call is received, the base unit will ring first and the in-use LED will
flash.
# If the handset is on the base unit, you will be connected automatically with your caller
as soon as the handset is lifted. To finish the call, replace the handset on the base unit
or press and release the [TALK] button (APO function must be on). See Page 21.
# If the handset is off the base unit, press the [TALK] button when the handset rings. To
terminate the call, press the [TALK] button or place the handset on the base unit.
# You can also answer the incoming call on the speakerphone by pressing the
[SPEAKER] button on the base unit. To terminate the call press the [SPEAKER] button
again.
