Bally-refrigerated-boxes Brand's Products

Figure 12:

View of raised tray

assembly on

temporary supports.

Installing the Telescoping Body Tray Assembly

1. With the back and two sidewalls erected and fastened together, place the

telescoping tray assembly into the partially constructed box. See Figure 11.

Insure that the ends of each cross brace are inserted into the vertical

struts. See Figure11a.

2. Raise and suspend the assembly to the desired height with temporary

supports. See Figure12.

3. At this time, securely fasten the cross braces to the supports struts with the

furnished clamps. See Figure 13.

Figure 11a:

Assembly tray inserted

into the vertical struts.

Figure 11:

Telescoping tray

inserted at a 45°

angle.

Proper order in which the clamps should be attached.

Figure 13:

Cross braces attached to

struts with clamps.

See Figure 9 on pg 5.