E
F
A
B
DC
• Remove the plugs of the middle cross-
beam.
• Remove the cover wit the help of a tool.
(A).
• Unscrew the lower hinge pivot (B) and
the spacer (C) and place them on the
opposite side.
• Re-insert the cover (A) on the opposite
side.
• Place the door on the lower hinge.
1
2
• Take out the cable form the door end
cap cover and place it into the upper
hinge.
• Re- screw the hinge.
• Connect the cable to the connecting
point in the front panel.
• Put back the top front covers on both
sides (2)
• Place the display cable, which is cur-
rently disconnected, into the cable
holder in the door end cap then put
back the door end cap cover.
22
www.electrolux.com
