8.5 Installation of the CleanAir Control filter
The CleanAir Control filter is an active car-
bon filter which absorbs bad odours and
permits to maintain the best flavour and
aroma for all foodstuffs without risk of
odour cross contamination
On delivery the carbon filter is in a plastic
bag to maintain it’s duration and charac-
teristics. The filter should be placed be-
hind the flap before the appliance is
turned on.
1.
Open the flap cover.
2.
Remove the filter from the plastic bag.
3.
Insert the filter in the slot found in the
back of the flap cover.
4.
Close the flap cover.
The filter should be handled care-
fully so fragments do not loosen
from the surface. The filter should
change once every six months.
8.6 Electrical Connection
CAUTION!
Any electrical work required to in-
stall this appliance should be car-
ried out by a qualified electrician
or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any lia-
bility should these safety meas-
ures not be observed.
1
2
3
4
5
The wires in the mains lead are
coloured in accordance with the
following code:
1
Green and Yellow: Earth
3
Brown: Live
5
Blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not correspond
20
www.electrolux.com
