Service manual WM70.C
18
24 Show
temp
Temp Off Only applies to the disinfection programmes (Pr17-Pr19)
Temp On
25 Change
temp
Pr1-Pr19 This can be changed in steps of 1°C between -10°C to +10°C. You cannot set a total
temperature that exceeds +92°C.
26 Programs Pr1-Pr19 Select “On” or “Off ”
Programmes can be activated/deactivated. A deactivated programme is not shown on the
display.
A maximum of 10 programmes can be shown on the display in programme mode. If more than
10 programmes are activated, then only the first ten activated programmes are shown on the
display.
If all the programmes have been deactivated, the display only shows “Pr1”.
If the machine is Swan-labelled, “Pr1” and “Pr2” are always activated/On.
27 Spin time 0-300 sec • Extend or shor ten the spin time: 0-300 sec.
• If “0 sec” is selected, the pre-programmed spin time is used.
• If a time in the interval “1 sec” to “300 sec” is selected, this time is added to the pre-
programmed spin time.
• This function only works for programmes Pr13 and Pr14.
28 Coin Coin Off See the wiring diagram for the correct connection and functionality of a slot meter.
Coin On
29 Reset Only production
reset
Used only in production
Return Press the Key button (S5) to return to 2 Settings.
3 Special
Pr 20 34 Pre wash 341 Number of 0/1/2/3
342 Water level Normal water level/High water level
343 Time 1/2/3/4/..... /15
344 Heat temp No heat/25°C/26°C/......./60°C
Return
35 Main wash 351 Temperature 30°C/31°C/...../92°C
352 Water level Normal water level/High water level
353 Reheat temp 28°C/29°C/..... /92°C
354 Reheat time 0min/1min/...../60°C
355 Work time 0min/1min/..... /60min
Return
36 Rinses 1 Rinse/2 Rinse/...../7 Rinses
37 Extra spin On/off
38 Spin speed 400/600/800/1000/1200/1300/1400/1500/1600 RPM
39 Spin time 0-300 sec
Return Press the Key button to return to the previous menu level.
Pr 21 See above
Pr 22 See above
Return Press the Key button (S5) to return to 3 Special.
Service menu content (cont.)
