22
*Reduced nose radius symmetrical bars (OREGON name — Double Guard)
IMPORTANT
Chain and guide bar gauge size must be identical. Use Bar/Chain combinations shown in table
above.
IMPORTANT
If your kick guard is damaged or lost, contact your Echo dealer for a replacement. For the name
of the Echo dealer nearest you, Call: 1-800-432-ECHO (3246) or on the web at www.echo-usa.
com.
Refer to your Chain Saw Safety Manual for kick guard application information.
Chain anD GuiDe baR Combinations
The following combinations may be used on CS-301, CS-341 or CS-346.
WARNING DANGER
Use of replacement saw chain and/or guide bar other than that specied, or operation without the “tip guard” in place,
may cause severe kickback resulting in serious injury.
Only use saw chain designated as, “LOW-KICKBACK,” that meets the ANSI B175.1-2000 Standard when tested on
the representative sample of chain saws below 3.8 C.I.D., and the Echo guide bar specied.
LEDOM
RAB
HTGNEL
KCABKCIKWOL
RABDRAUG
NIAHCWASKCABKCIKWOL
KCIK
DRAUG
N/PRAB
NIAHC
.ONTRAP
SKNILEPYTHCTIPEGUAG
N/POHCE
)N/PMEO(
103-SC
143-SC
643-SC
"21
"41
"61
znetnI"21
MT
znetnI"41
MT
"61znetnI
MT
5473DC0A21
2573DC0A41
7573DC0A61
5473DZ0A21
2573DZ0A41
7573DZ0A61
E54-GV19
E25-GV19
E75-GV19
E54-GV19
E25-GV19
E75-GV19
54
25
75
54
25
75
GV19"8/3"050.
1094982
94982
