7. The machines starts and
works through the stages
shown below.
If you change your mind ...
... and want a different program:
Turn the program knob and program selector to the required
positions, and press any temperature switches that you want.
... or want to interrupt the program
Turn the program knob to Drain to make the machine pump
out. After about two minutes, you can open the door. If you
add more washing and restart the machine, check that there
is detergent left in the detergent compartment.
Which program should I choose?
You can naturally select a standard program or, by combining
your prefered temperature setting, program and option
selection, produce p program to suit your requirements.
Program
Prewash
Main wash Rinses
Spin
Action
Water level
Normal
1 11 1
□ □□□
1000 rpm
Normal
Normal
Permanent
Press
1 11 1
□ □□
® 800 rpm
Normal
Normal
Delicate
1 11
□ □□
^ 800 rpm
Gentle Normal
Point to note: Before starting to spin, the machine checks that the load
is evenly distributed in the drum. If not, it redistributes the
load by turning at normal drum speed and then makes
another attempt to start spinning.
