How to TEST it without placing switch, to see if I like my P4 turned into P2?
How to turn P4 to P2 (FWD), open bonnet, and look on drivers side of car for two relays with fuses on them,
one that is closer to shock absorber should be el. clutch relay (with blue stand) come to relay red, red-black, purple-
black, pink) so you can't miss it. Take fuse out or even whole relay, in any case with that el. clutch won't get electricity,
also 4x4 warning lamp will ignite, which will tell you that computer found error and just disconnected further monitoring
of all 4x4 system in car, which means that with it you disconnected all electric 4x4 systems in car, and you don't have to
be afraid of damaging any, yours drive shaft will continue to turn but it will not transfer any Nm to rear wheels.
Don't be afraid that 4x4 is ignited because it's good thing, because it means that all 4x4 electronic is shut down.
Drive car and enjoy in P2.
After that to drive P4, turn off ignition, place back fuse (relay) and ignite car, and drive as again P4.
