
ELECTRICAL SySTEMS
H - 18
H
The fluid tank monitor system has been calibrated at the TouchSensor fac-
tory for the size tanks the Interstate uses and should never need another
calibration. On the rear of the monitor panel there is an adjustable potenti-
ometer to manually adjust the monitor panel reading of the LPG tank level,
this is set at the Airstream factory for the tank on the Interstate motorhome
and needs no further adjustment.
ENTERTAINMENT SYSTEM
Antenna Manufacturer:
Winegard Company
3000 Kirkwood Street
Burlington, Iowa 52601-2000
Phone: 800-843-4741
Winegard’s Model RS 3460 RoadStarTM omnidirectional antenna provides
excellent reception of VHF/UHF TV channels. The RoadStar compact modern
styling is unobtrusive and blends well with the designs of recreational
vehicles.
The UV stabilized copolymer housing makes the antenna virtually impervious
to weathering and color change. The unique omnidirectional characteristics
of model RS-3460 provide excellent reception in areas where stations are in
different directions without the need for a complex rotor system. A built-in
amplifier provides up to 6 times the received signal on VHF and 9 times the
UHF signal insuring the best possible reception in color and black and white.
Cleaning Antenna Housing
The surface of the antenna is a tough laminated ultraviolet shield. Clean only
with mild soap and water. Use no solvents, alcohol, or cleaning fluids.
In-Motion TV Antenna Pre-Wire
The motorhome is pre-wired with a coax cable for an in-motion TV antenna.
One end of the cable is coiled above the rear center roof locker, coiled above
the removable interior top panel and the other end is coiled behind the remov-
able entertainment cabinet side panel where the TV booster is mounted. A
receiver can be placed inside the cabinet. A HDMI cable is located in the center
rooflocker and runs to the rear or wardrobe TV.
Listed below are components located inside the Entertainment Cabinet and
their functions.
An outlet blank is installed in the cabinet. The blank
has a 110 VAC circuit wire looped in it for installation
of an outlet.