- 4 -
OVERVIEW
The AG-7448CU is a bandwidth rich switch. The device has forty-eight 10GbE SFP+ ports
and four 40GbE QSFP slots. In addition to the rich bandwidth, the AG-7448CU provides
comprehensive switch hardware capability to support Cumulus layer 2 and layer 3 features.
FCoE and MPLS are also supported on the AG-7448CU Designed for high-speed
throughput and featuring leading edge software, this switch carries on Agema's tradition of
producing affordable, high performance workgroup layer 3 stackable switches.
FEATURES
The following lists the key main features of the AG-7448CU switch:
640Gbps switching bandwidth (1280Gbps duplex)
Support Jumbo Frame up to 12Kbyte
Automatic address learning function to build the packet-forwarding information table.
The table contains up to 128K MAC addresses
Store-and-Forward transmission to remove bad packets from the network
Alternate Store-Forward (ASF) mode - Cut-through is available to minimize the latency
Power supply LED / Stack ID / FAN status LED indication
Extensive system LED and per port LEDs
External power supply
Standard 1U chassis high
17" rack mountable
Memory Management:
8 MB of packet buffer memory
Explicit Congestion Notification (ECN)
Weighted Random Early Detection (WRED)
INTRODUCTION
1
