COMPLIANCES AND SAFETY STATEMENTS
- 2 -
FCC - CLASS A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
You may use unshielded twisted-pair (UTP) for RJ-45 connections - Category 3 or better for 10 Mbps
connections, Category 5 or better for 100 Mbps connections, Category 5, 5e, or 6 for 1000 Mbps connections.
For fiber optic connections, you may use 50/125 or 62.5/125 micron multimode fiber or 9/125 micron single-
mode fiber.
CE MARK DECLARATION OF CONFORMANCE FOR EMI AND SAFETY (EEC)
This information technology equipment complies with the requirements of the Council Directive 89/336/EEC
on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/
EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/ 68/EEC. For
the evaluation of the compliance with these Directives, the following standards were applied:
SAFETY COMPLIANCE
Warning: Fiber Optic Port Safety
Avertissment: Ports pour fibres optiques - sécurité sur le plan optique
Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit
RFI Emission Limit according to EN 55022:2010, Class A
Limit for harmonic current emission according to EN 61000-3-2:2006+A1:2009+A2:2009
Limitation of voltage fluctuation and flicker in low-voltage supply system according to
EN 61000-3-3:2008
Immunity
Product family standard according to EN 55024:2010
Electrostatic Discharge according to IEC 61000-4-2:2008
Radio-frequency electromagnetic field according to EN 61000-4-3:2006/A1:2007/A2:2010
Electrical fast transient/burst according to EN 61000-4-4:2004/A1:21010
Surge immunity test according to IEC 61000-4-5:2005
Immunity to conducted disturbances, Induced by radio-frequency fields: IEC 61000-4-6:2008
Power frequency magnetic field immunity test according to EN 61000-4-8:2009
Voltage dips, short interruptions and voltage variations immunity test according to
IEC 61000-4-11:2004
LVD
EN 60950-1:2006+A11:2009
When using a fiber optic port, never look at the transmit laser while it is powered on. Also, never look
directly at the fiber TX port and fiber cable ends when they are powered on.
Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez jamais directement le port TX
(Transmission) à fibres optiques et les embouts de câbles à fibres optiques tant qu'ils sont sous ten-
sion.
Niemals ein Übertragungslaser betrachten, während dieses eingeschaltet ist. Niemals direkt auf den
Faser-TX-Anschluß und auf die Faserkabelenden schauen, während diese eingeschaltet sind.
