UNO-1170A/AE User Manual 22
Chapter 3 Initial Setup
3.1 CompactFlash Card Installation
The procedure for installing a CompactFlash card into the UNO-1170A/
AE is as follows, please follows these steps carefully. Although the out-
side appearance of the UNO-1170A/AE is different from the figures
shown below, the procedure is the same.
1. Remove the power.
2. Unscrew six screws from UNO-1170A/AE indicated below.
3. Remove the rear cover.
4. Plug a CompactFlash card with user’s OS and application program
into a CompactFlash card slot on board.
5. Screw back the rear cover and the four screws.
