19
2.15 PCI/104+ Connectors (UNO-1170AE only)
UNO-1170AE supports up to two PCI/104+ cards. The cards will be
installed on connector noted “CN18 and CN19”. If your PC/104+ card
requires VIO voltage settings adjust the jumper on CN4 on the expansion
board.
Jumper Setting for +3.3V example:
Figure 2.7: RS-422/485 Jumper Settings
Table 2.9: Programmable Buzzer Control Bit
SPKS1 SPKS0
Beep on 0 0
Short beep 0 1
Normal beep 1 0
Long beep 1 1
Table 2.10: PC/104+ VIO Voltage Jumper Settings
Voltage Jumper close position setting
+5V 1-2
+3.3V 2-3
