PCM-7130 User’s Manual 40
Example:
Create "Startup.ini" in "\IPSM\Startup" directory and reboot the system.
The content of startup.ini was listed below:
\windows\tty.exe
\windows\registry.exe
After the system reboot, "\windows\ tty.exe" and "\windows\ registry.exe"
would be executed automatically.
Be sure that the two methods are independent, it means they can be used
simultaneously.
3.2.6 Safemode
PCM-7130 utilities allow user to alter registry setting, and save it by
either "regflash.exe" or the registry frame of the “Misc” page of the Con-
figurator. But sometimes user may make some non-appropriate registry
setting, and cause PCM-7130 fail to boot. In the circumstance, the easiest
way to boot up PCM-7130 is to use the default registry setting from the
WinCE image. When the PCM-7130 is booted up with the default regis-
try setting, we say that it is working in "safemode". To enter "safemode",
user must perform several steps as described below:
Step 1: Create a file whose filename is "safemode" or a directory whose
name is "safemode" in the Compact Flash Card.
Step 2: Insert the Compact Flash Card into the PCM-7130.
Step 3: Turn on the power of PCM-7130.
The registry searching sequence of the PCM-7130 was described in
Appendix.
