GOGO−no−coda ver. 2.24 (Feb 12 2000)
Copyright (C) 1999 PEN@MarineCat and shigeo
Special thanks to Keiichi SAKAI, URURI, Noisyu and Kei
This is based on LAME3.29beta and distributed under the LGPL
usage
gogo inputPCM [outputPCM] [options]
inputPCM is input wav file
if input.wav is `stdin' then stdin−mode
outputPCM is output mp3 file (omissible)
options
−b kbps bitrate [kpbs]
−br bps bitrate [ bps]
−silent dont' print progress report
−off {3dn,mmx,kni(sse),e3dn}
−v {0,..,9} VBR [0:high quality 9:high compression]
You should combine this with −b option
for only RAW−PCM input
−offset bytes skip header size
−8bit 8bit−PCM [dflt 16bit−PCM]
−mono mono−PCM [dflt stereo−PCM]
−bswap low, high byte swapping for 16bitPCM
−s kHz freq of PCM [dflt 44.1kHz]
−nopsy disable psycho−acoustics
−m {s,m,j} output format s:stereo, m:mono, j:j−stereo
−d kHz change sampling−rate of output MP3
−emh {n,c,5} de−emphasis
−lpf {on,off} 16kHz filter [dflt use if <= 128kbps; not use if >= 160kbps]
−test benchmark mode
−delete delete input file, after encoding
RipEnc
RipEnc performs the same task as the code above, but is written in shell and is easier to use :)
Here's what it looks like.
RipEnc version 0.7, Copyright (C) 1999 Michael J. Parmeley
There is currently NO encoding process running in the background
Your encode.log file is 982607 bytes long.
<Enter 'd' for details, 'v' to view the encode log, or 'del' to delete the encode log>
1) Change working directory....................[/megajukebox/tmp]
2) Choose encoder..............................[lame]
3) Choose ripper...............................[cdparanoia]
4) Choose id3 tool.............................[none]
5) Toggle between Manual and CDDB naming.......[manual]
6) Setup XMCD_LIBDIR variable for CDA..........[/var/X11R6/lib/xmcd]
7) Set preferred naming convention.............[artist−name_of_song.mp3]
8) Rip whole CD?...............................[no]
9) Set small hard drive option?................[no]
The Linux MP3−HOWTO
RipEnc 18
