17
Following the Connection Wizard
Basic Network Settings
[Enter connection] and [Search again]
To configure settings for the wireless LAN device manually, select [Enter connection] and
press < >. Complete the settings for the items displayed, one after another.
To search for wireless LAN devices again, select [Search again] and press < >.
Next, enter the encryption key of the wireless LAN device. For details on the encryption key,
refer to the device’s instruction manual.
Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and
encryption of the wireless LAN device.
The [Key index] screen is displayed only if WEP
encryption is used by the wireless LAN device.
Turn the < > dial to select the key index number
specified as the access point, and then press
< >.
Select [OK] and press < > to go to the next
screen.
Turn the < > dial to select the key format, and
then press < >.
Select [OK] and press < > to go to the next
screen.
Enter the encryption key.
To switch between input areas, press the < >
button.
To move the cursor, turn the < > dial.
In the bottom input area, turn the < > dial and
press < > to enter the encryption key.
If you make a mistake, press the < > button to
erase it.
Press the < > button to go to the next screen.
To return to the previous screen, press the
< > button. The entry is erased.
Entering the Wireless LAN Encryption Key
