16
Following the Connection Wizard
Turn the < > dial to select the type of LAN, and
then press < >.
Select [OK] and press < > to go to the next
screen.
Wireless LAN
Active wireless LAN devices in your area are found and listed.
Wired LAN
The [Network] settings screen is displayed. If you have selected a wired network, refer to page
18, “Configuring Network Settings.”
Use a Category 5 or higher STP LAN cable. (STP: Shielded Twisted Pair)
Wireless LAN devices are listed with identifying information. Select the SSID (or ESS-ID) of
your desired wireless LAN device.
To select the wireless LAN device, press < >.
Turn the < > dial to select the wireless LAN
device, and then press < >.
Select [OK] and press < > to go to the next
screen.
Indicates whether the device is in infrastructure or ad hoc mode
An icon is displayed if the wireless LAN device is encrypting communication
Indicates the first 9 characters of the SSID
Indicates the channel used
Encryption by Wireless LAN Devices
If the wireless LAN device is encrypting communication, select the corresponding method in
[Authentication] and [Encryption].
[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK
[Encryption]: WEP, TKIP, or AES
Selecting the LAN Type
Selecting the Wireless Network
