7
ENGLISH
Glossary
A function to allow or block trafc from network devices with specied IP addresses.
IP address ltering•
A function to prevent communication between multiple wireless devices (such as computers and
printers) connected to an access point.
Privacy separator feature•
DHCP function•
A function to automatically assign required information (IP address, etc.) to computers, printers or other
devices connected to the network.
IP address•
A numerical identication assigned to each computer or network device connected to a network.
Check
Action
Action
Problems during Network Setup
"E > 2 > 3" is Displayed
The message appears when multiple access points are
detected.
Wait for a while, then congure the settings again.
WPS
The error appears when attempting to congure LAN
settings of the machine from the Operation Panel while
they are being congured in another way. Congure the
settings after completing the settings.
"E > 2 > 0" is Displayed
Check the access point settings, then congure WPS
settings again.
For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.
•
The message appears when an error occurs.
"E > 2 > 4" is Displayed
For the procedure to congure WPS settings of the machine, refer to "Wireless Setup Using WPS
(Wi-Fi Protected Setup)" in the printed manual: Getting Started.
•
When using an access point that does not support WPS, congure the settings by referring to "6
Set Up a Wireless Connection" in the printed manual: Getting Started.
•
