AerAtron Brand's Products

Check

Problems during Software Installation

The Target Access Point is Not Displayed (Detected) on the Detected

Access Points List Screen

Make sure that you follow "Connection Checklist"

on page 11, then click Refresh (A) to search for the

access point again.

Check 1

Turn off the access point, turn it back on, then click

Refresh (A) to search for the access point again.

Check 2

Is SSID broadcast (connection via "ANY" SSID, etc.) disabled or is the stealth mode

enabled on the access point?

For details on how to check the settings of the access point, refer to the manual supplied with the

access point or contact its manufacturer.

•

Enable SSID broadcast (connection via "ANY" SSID, etc.) or disable the stealth mode,

then click Refresh (A) to search for the access point again.

For details on how to change the settings of the access point, refer to the manual supplied with

the access point or contact its manufacturer.

•

To establish a connection without changing the access point settings, refer to

and

onward in "Conguring Wireless LAN Settings Manually" on page 8.

Check 3

If the target access point is not displayed on the

Detected Access Points List screen, check the

following points.

Is "WPA/WPA2 Enterprise" set as a security protocol (encryption standard) on the

access point?

"WPA/WPA2 Enterprise" is not supported on the machine.

Change the security protocol (encryption standard) for the access point, then congure

settings again.

For details on how to change the security protocol (encryption standard) for the access point,

refer to the manual supplied with the access point or contact its manufacturer.

•

For the procedure to congure settings of the machine, refer to "6 Set Up a Wireless Connection"

in the printed manual: Getting Started.

•

An access point's periodic transmission of a signal revealing its SSID.

Stealth mode•

A function to prevent the SSID of the access point from appearing on other wireless devices.

SSID broadcast•

Glossary

Check 4

An identier to identify the specic access point. Also called an access point name or a network name.

SSID•

The message appears when no access point can be detected.

Click OK to display the Detected Access Points List screen,

then try to detect the access point again by referring to "The

Target Access Point is Not Displayed (Detected) on the

Detected Access Points List Screen" on page 2.

An access point could not be detected. is Displayed