Zipper Brand's Products

Before Use

Common Camera

Operations

Camera Basics

Other Shooting

Modes

P Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Basic Guide

Tv, Av, and M

Mode

Auto Mode

Advanced Guide

Cover

Still Images/Movies

• If the camera is turned on while the <p> button is held down, the

camera will no longer sound. To activate sounds again, press the

<n> button and choose [Mute] on the [3] tab, and then press

the <q><r> buttons to choose [Off].

Still Images

• A blinking [ ] icon warns that images are more likely to be blurred

by camera shake. In this case, mount the camera on a tripod or take

other measures to keep it still.

• Ifyourshotsaredarkdespitetheashring,moveclosertothe

subject.Fordetailsontheashrange,see“FlashRange”(=

176).

• The subject may be too close if the camera only beeps once when

you press the shutter button halfway. For details on the focusing

range (shooting range), see “Shooting Range” (=

176).

• To reduce red-eye and to assist in focusing, the lamp may be

activated when shooting in low-light conditions.

• A blinking [h] icon displayed when you attempt to shoot indicates

thatshootingisnotpossibleuntiltheashhasnishedrecharging.

Shootingcanresumeassoonastheashisready,soeitherpress

the shutter button all the way down and wait, or release it and press

it again.

• Although you can shoot again before the shooting screen is

displayed, your previous shot may determine the focus, brightness,

and colors used.

• You can change how long images are displayed after shots (=

47).

Movies

• Keepyourngersawayfromthe

microphone while shooting movies.

Blocking the microphone may prevent

audio from being recorded or may

causetherecordingtosoundmufed.

• Avoid touching camera controls other than the movie button when

shooting movies, because sounds made by the camera will be

recorded.

• Audio is recorded in stereo.

• Distorted audio caused by recording when the wind is strong can be reduced.

However, the recording may sound unnatural when this option is used when

there is no wind. When the wind is not strong, press the <n> button,

choose [Wind Filter] on the [4] tab, and then choose [Off] (=

24).

Microphone