Forwarding Scanned Data to the Computer Using the Operation
Panel of the Machine
You can forward the scanned data to the computer using the operation panel of the machine.
Before forwarding scanned data to the computer, confirm the following:
•
MP Drivers are installed.
If MP Drivers are not yet installed, insert the Setup CD-ROM into the computer's disc drive, then install
MP Drivers.
•
The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB cable or LAN cable while the machine is in operation, or when the
computer is in the sleep or standby mode.
If you perform scanning via a network connection, make sure that all the required settings have been
specified.
Network Scan Settings
•
The destination and the file name are specified in Canon IJ Scan Utility.
You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of
Canon IJ Scan Utility:
Settings Dialog Box
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Press the SCAN button.
If you forward the data to the USB-connected computer:
The Scan standby screen is displayed.
Go to step 3.
Note
If the screen for selecting to which you save the data is displayed, select PC and press the OK
button, then select Local (USB) and press the OK button. The Scan standby screen is displayed.
If you forward the data to the network-connected computer:
The screen for selecting to which you save the data is displayed.
