21
Fabric softener was not
rinsed in, the compart-
ment w for condition-
ers is full of water.
Fabric softener insert in the
compartment for condition-
ers is not correctly attached
or is blocked.
Clean the detergent drawer,
insert the fabric softener
insert firmly.
The door cannot be
opened when the wash-
ing machine is switched
on.
Door locked.
Wait until the (DOOR) in-
dicator is illuminated green.
There has been a power cut.
(All the indicator are off).
The door remains blocked
for approx. 4 to 10 minutes.
The programme will continue
when the power cut is over.
To remove washing:
If water can be seen in the
appliance, first drain off the
water before opening the
loading door (see section
“Carrying out an emergency
drain”).
Washing is heavily
creased.
Possibly too much washing
was loaded.
Observe maximum loads.
Problem Possible cause Remedy
