12
Use
First Use
Ensure that the electrical and water connections comply with the installation
instructions.
Remove the polystyrene block and any material from the drum.
Setting the language
When switching on the appliance for the first time, by turning the programme selector
dial, you must set the language in which you want the messagges in the display to
appear. When the appliance is switched on again all the messagges in the display will
appear in this language.
Important!
If the display is not showing any language, the appliance has already been
switched on once. In such case, if you would change the language setting, press
at the same time TEMPERATURE and SPIN REDUCTION buttons for 6 seconds
to activate the menu language. By pressing the OPTION button you can scroll all
the available languages.
Press the
OOKK
button twice to confirm your choice.
Setting the time
After having chosen the language you must set the time prior to the first wash
and when changing to and from daylight savings time.
The clock setting permits you to modify/set up the current time. It is important
to keep it updated as the current END Cycle Time depends on it.
With a short/single time pressure of the OPTION button, the time varies minute
by minute. With a continue pressure of the same buttons, the time varies 10
minutes by 10 minutes.
Press the
OOKK
OOKK
button to fix the current time.
Personalization
This appliance is provided of a SETTINGS menu that allows you to modify the
factory settings as you want.
When you switch on the machine, by turning the programme selector dial, press
the OPTION button to activate the Options menu. By pressing again the same
button you can move through all the available options till when you locate the
SSEETTTTIINNGGSS
menu. Press
OOKK
to access in the menu. Use again «OPTION» button to
scroll all the settings and press
OOKK
button to confirm your choice.
132969591.qxd 18/01/2008 11.18 Pagina 12
