• Alarm code indicating a fault in the machine operation (see page 73).
Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up
the programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme
has finished, the FIN (End) pilot light comes on.
When the programme has finished, if the SOBRE
DOSIF. light (Overdosage) comes on, it indicates
that too much detergent has been used.
Cancelling a programme
To cancel a programme which is running, turn the programme selector
dial to the RESET O/OFF position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to O/OFF and then to
the programme DESAGUAR, CENTRIFUGAR or CENTRIF. DELICADO.
Altering an option or a programme which is running
To alter an option, first set the machine to PAUSE by pressing the
START/PAUSE button.
Any option can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O/OFF and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
Opening the door after the programme has started
To open the door set the machine to PAUSE by pressing the START/PAUSE
button.
The door can be opened if:
• the machine is not already heating;
• the water level is not above the bottom edge of the door;
• the drum is not turning.
55
Description of the appliance
ACLARADO
ACLARADO +
CENTRIFUGAR
FIN
PUERTA
PRELAVADO/
LAVADO
SOBRE DOSIF.
RINSES
EXTRA
RINSE
SPIN
END
DOOR
PREWASH/
WASH
OVER-
DOSAGE
132974420_gb.qxd 01/02/2007 14.37 Pagina 55
