3D-Link VWR User Manual
Chapter 1 - Product Overview
Rear Panel
Front Panel
Power Internet Wireless Ethernet (1-4) Phone (1-2)
When the power light
stops blinking and is a
solid green, this indicates
that your adapter has
started up properly. Note
that both the power light
and the phone light must
be solid in order to make
a phone call.
A solid light indicates
connection on the
Internet port. This
light blinks during
data transmission.
A solid light indicates
that the wireless
segment is ready.
This light blinks
during wireless data
transmission.
A solid light indicates
a connection to an
Ethernet-enabled
computer on ports
1-4. This light
blinks during data
transmission.
Solid light indicates
that the phone
line is ready for
Vonage Internet
telephone or FAX
calls. A slow blinking
light indicates that
voicemail is present.
When the line is in
use or ringing, the
light will blink rapidly.
Phone (1 & 2) Ethernet (1-4) Internet Reset Power
Plug your phone into
port #1 and if you’ve
signed up for a second
Vonage phone line, an
optional phone or FAX
machine into phone
port #2.
Connect to other
Ethernet devices such
as computers using
standard Ethernet
cables.
This port is the
connection for the
Ethernet cable to the
Cable or DSL modem.
Press the reset button
for at least 10 seconds
to reset the Vonage
VWR Device back to
the default settings.
Plug in the
supplied power
adapter.
Note: When the Vonage Device is downloading/upgrading firmware from Vonage,the lights will blink rapidly in unison.
