Page 8 of 10
Premium Tech Tool
Information is subject to change at any time without notice. Any printed copy of this bulletin is an uncontrolled document.
Can we use the 88890020 communications interface on the OBD2013
trucks with
the 16 pin Diagnostic connector?
Yes and no. There is a 16 pin cable, 88890026 that you can use with the
88890020 interface but this combination can only support two data-links at a
time. This will support ISO and J1587. J1939 is not supported with this cable.
Does Tech Tool 2 work with different brands of communication
adapters?
Yes, Tech Tool 2 works with some RP1210 adapters.
Check http://volvotrucksemedia.com/Default.aspx and http://www.macktrucksemedia.com
for a complete list.
Is there a 16 pin cable for the Dearborn interface? P/N: DG-V13-cable-kit
Yes, please visit www.dgtech.com
Is there a 16 pin cable for the Noregon interface? P/N: 12159
Yes, please visit www.noregon.com
Is there a 16 pin cable for the Nexiq USB interface?
Yes, Nexiq P/N: 442023 make sure you update the drivers to the latest version.
They are available at www.Nexiq.com. The current version is: V9.2.1.0.
Why are Diagnostics not enabled for pre-2007 vehicle?
Diagnostics are available for Mack and Volvo 2007 and newer emissions
vehicles. Look in service information for help with pre-2007 Mack and Volvo
vehicles.
How can I read the Diagnostic Trouble Codes on pre 2007 vehicles?
Go to test and then Function Group 1. You can read and clear DTCs here on
pre-2007 vehicles.
Can Tech Tool 2 be used to program a customer’s vehicle at a location
without
network access?
Yes, by using the Manage Software function found under Tech Tool menu in
the top left of the front page, the software can be downloaded with an internet
connection and then TT2 can be used offline (no internet connection) to
program ECUs for the vehicle in question.
Note: Manage Software New is for the OBD2013 and newer vehicles.
