TO OPERATE CLEANER
A
CAUTION
Do not use outlets above counters Damage to items in the surrounding areas
could occur. Be sure the switch is in the off position vi/hile plugging the cord in
POWER CORD
NOTE To reduce the nsk of electrical shock, this vacuum has a pdanzed plug, (one blade is wider
than frie other) This plug will fit in a polanzed outiet only one way If the plug does not fit fully in the
outlet, reverse the plug If it still does not fit, contact a qualified electncian to install the proper outlet
DO NOT CHANGE THE PLUG IN ANY WAY
ON/OFF SWITCH
1 Plug the power cord into a 120V outlet
2 To start the vacuum cleaner, push the
switch on the top of the dust compartment
to the ON position
3 To stop the vacuum cleaner, push the
switch on the top of the dust compartment
to the OFF position
HANDLE ADJUSTMENTS
The handle may be lowered
to any position required Just
step on the area as indicated
by the Illustration and
lower the handle as
desired
1 Upright position
The handle locks in this
position for storage
The handle should
always be in an
upright position when
the cleaning tools
are used
2 Middle position
This position IS for
normal cleaning
3 Low position
This position
IS used for
cleaning
under
furniture
-9-
