REMOVE THE FOLLOWING:
GLOVE BOX DOOR. SEE FIGURE 6.
GLOVE BOX SHELL (DISCARD, RETAIN SCREWS). SEE FIGURE 5.
AC/HEATER/EVAPORATOR ASSEMBLY AND ALL RELATED DUCTING (DISCARD), RETAIN SCREWS.
SEE FIGURE 6.
A/C HEAT OUTLETS (RETAIN). INSTRUMENT PANEL MUST BE REMOVED TO GET TO LEFT OUTLET,
AND CONTROL PANEL (SEE FIGURE 6).
CONTROL PANEL ASSEMBLY (RETAIN CONTROL PANEL) SEE FIGURE 6.
REFER TO CONTROL PANEL CONVERSION KIT INSTRUCTIONS FOR INSTALLTION OF CONTROLS.
REMOVE PASSENGER SIDE KICK PANEL FRESH AIR COVER (DISCARD) AND KICK PANEL (RETAIN). REMOVE
CABLE (DISCARD) FROM PANEL (SEE FIGURE 6).
REMOVE OEM DEFROST DUCT ASM.
NOTE: REMOVAL OF DASHBOARD REQUIRED TO INSTALL THE EVAPORATOR. VINTAGE AIR
RECOMMENDS THAT YOU UTILIZE THE FACTORY SERVICE MANUAL WHEN YOU DISASSEMBLE
AND REASSEMBLE THE DASHBOARD.
PASSENGER COMPARTMENT
905070 REV A , 1970-78 CAMARO w/ AC GEN IV EVAP INSTR PG 7 OF 10/3/07 27
FIGURE 5
FIGURE 6
GLOVE BOX
SHELL
GLOVE BOX
DOOR
KICK PANEL
FRESH AIR COVER
KICK PANEL
AC/HEATER ASSEMBLY
& RELATED DUCTING
DRIVER SIDE
LOUVER
INSTRUMENT
PANEL
CONTROL
PANEL
7
1970-78 CHEVY CAMARO w/ AC GEN IV
