Section 19: eManager PROGRAMMING FOR emaGEN IN unite SYSTEMS
19-13
19.7 ASSIGNING INTERCOM RESTRICTION
A
unit
e
system (including
e
maGEN
), is able to support up to:
• four tenants on a single
unit
e
128 or
unit
e
400 system,
or
• 24 tenants on a single
unit
e
1000 system.
If there is a tenant configuration, ICM (intercom) restriction is
applied separately for each tenant. If there is no tenant configura-
tion, all extensions default to tenant #1.
ICM group
An ICM group is a restricted internal calling group. You can establish
up to:
• four ICM (intercom) groups on a single
unit
e
128 or
unit
e
400 system
or
• 16 ICM groups on a single
unit
e
1000 system.
For additional information on ICM restriction see the Feature descrip-
tion manual.
ICM class
The ICM class designation is used to restrict calling within ICM
groups.The ICM group and ICM class designations only affect the
making and receiving of internal calls. For each Class of Service, you
may assign one ICM class to one of the four, or 24 ICM groups -- de-
pending on your specific
unit
e
system. An extension, assigned a
particular COS, can call only those extensions in the designated ICM
group (i.e. only those in the same vertical ICM# column) and only
those with the ICM group having the same or higher ICM class as de-
fined for that COS. (The highest ICM class is 1. The lowest ICM class
is 4).
For example, if COS 1 is assigned to ICM group 1 and is assigned
ICM class 3, extensions with COS 1 can call any extension with a
COS assigned to ICM group 1 and assigned an ICM class of 3 or 4.
In this example, an extension in COS 1 is NOT able to call any
extensions in ICM groups 2, 3 or 4 or those extensions in ICM group
1 with an ICM class of 1 or 2
From the Station Group Features heading, select the Hunt Groups
screen. The system displays the Hunt Groups I-H Screen.
1. Enter the number (1-4 or 1-16 -- depending on your specific
unit
e
system) of the ICM group to which you want the IVM hunt
group to belong in the IVM group parameter.
