Section 18: FAX
18-5
this number.
18.5.2 Same Call (One-To-One)
To implement this mode, make sure the fax card is connected direct-
ly to the voice port. A script, which handles this mode, should include
a selection of the document number followed by a TransFax com-
mand.
18.5.3 Return Call (Dedicated line)
To implement this mode, make sure there is a fax card independent
of all voice ports, and which is defined as FAX ONLY.
18.5.4 Same Call and Return Call combination
In order to use the two modes in the same system:
1. Make sure you have a dedicated card in addition to the on-line
card.
2. Port definition must include FAX ONLY ports, as well as
VOICE+FAX ports.
3. Use a special script command (Menu 1 Digit /S) to divert the call
according to the relevant options.
What are the relevant options?
There are several cases which may occur, when using the combined
mode:
1. All voice lines are equipped with a one-to-one fax card, and in
addition there is one or more independent fax lines. In this case,
a caller to each line will have the option to get on-line or return-
call fax.
2. Some voice lines are equipped with one-to-one fax. A call
comes in on a line equipped with fax: the caller will have both
options.
3. Some voice lines are equipped with one-to-one fax. A call
comes in on a line not equipped with fax: the caller can be told to
call a different line for on-line or enter a number for return-call.
4. None of the voice lines is equipped with a fax card. Only dedi-
cated fax is available. The system will prompt the caller to enter
number for redirection.
18.5.5 Fax Function Descriptions
To create a fax-on-demand script, four functions are available:
• Choose Doc.
• Get Phone No.
•Trans. Fax.
