Avanti 3015 and Avanti 3000 sets 21
but press [
*
] after entering the destination (step 5).
If more than one set with a button for the same DN is
authorized to forward calls for that DN, the last program-
ming performed overrides the previous.
2. Press [FEATURE].
3. Dial the code that designates in which situation you want
your calls forwarded:
4. Dial the code designating the calls you want forwarded:
5. Enter the new destination to which you want your calls for-
warded.
Instead of dialing the extension number, you may press a
Memory button programmed with an extension number
(for internal calls only) - or press a Speed Dial button (or
press [SPEED DIAL] and dial a Speed Dial memory bin
number) for internal or external calls, as determined by the
contents of the memory.
Calls are forwarded to the contents of the Memory button
or Speed Dial bin. If you change the contents of the Speed
Dial bin, calls are forwarded to the new destination. This
does not apply to the Memory button.
In order to program Dial
Call forward always [F][L] or [3][5]
In order to program Dial
Call forward busy [F][B] or [3][2]
Call forward no answer [F][N] or [3][6]
In order to program Dial
All calls [A] or [2]
External calls [E] or [3]
Internal calls [I] or [4]
3015_3000txt.fm Page 21 Monday, May 12, 2003 10:34 AM
