6 Avanti 3015 and Avanti 3000 sets
Outside Line Buttons
One or more of the buttons on your telephone may be associ-
ated with either specific lines or outside line groups. To access a
line for dialing outside the system, press an outside line button.
Floating Buttons
Calls on outside lines for which no button has been defined,
may be associated with a button just for the duration of the
call. These are called “floating” buttons.
NOTE Some of the access codes in your system may be
different from those indicated here. If so, see your
system administrator for the correct codes.
DISTINCTIVE RINGING
You can program telephone sets located close to each other
with distinctive rings, to enable you to identify which telephone
is ringing. Nine different rings are available.
TO CHANGE THE RING TONE OF YOUR TELEPHONE
SET
1. Press [
*
] and [#] simultaneously.
2. Press one of the dialpad buttons ([1] - [9]).
When you hear the ring that you want:
3. Press [#].
4. Lift and replace the handset.
3015_3000txt.fm Page 6 Monday, May 12, 2003 10:34 AM
