© ZyXEL Communication Corp. Page 15 of 24
Proprietary & Confidential Information
2. Sideband description on 2.4G GUI.
[BUG FIX]
1. ITS: 140200569 , The root cause is disable the Ethernet WAN and then enable it. The
speed will keep fix 100M. (1)When we fix 1000M on Ethernet wan and then disable it.
Make sure Ethernet WAN link down. (2) Enable Ethernet WAN, it will fix on 100M.
After reboot, Ethernet WAN can back to 1000M.
2. ITS: 140103717, No IPv6 traffic LAN to WAN when v6 firewall are disabled.
3. ITS: 140104452, FTP upload can't work in Linux environment. Condition: (1)using linux
command "ftp 192.168.1.1" to connect with CPE ftp server.(2)use command "put ras.bin"
to upload FW to CPE(3)CPE without accept any FW data package. Expectation:(1)When
use put command to upload image, the CPE should receive data packages.(2)Then use
command "bye" to start upload FW process.
4. Fixed : (1)Go to "Network Setting > QoS > Class Setup" webpage by IE browser, you can
see the Edit and Delete icons are misplaced.(2)Go to "Network Setting > QoS > Policer
Setup" webpage by IE browser, you can see the background are cut.(3)Go to "Connection
Status > Status" webpage by IE browser, in "Registration Status" section, you can see the
"UnRegister" button lose right-side line.
5. [UK] Interface group leaks : If interface group is setting at LAN1 then LAN2~4 packet
should be not sent to LAN1 port.
Modifications in V1.00(AAKL.3)b2
[FEATURE ENHANCED]
6. Support ACL to select IPv6 LAN device. (not support static IPv6).
7. Description: consider Support Trust domain for IPv6 .Condition: when set trust domain IP,
it is set as ACCPET for INPUT chain of iptables, but we don't consider about IPv6.
8. Support Concurrent WAN for routing and bridge mode with same PVI/VCI.
9. Support "Mode Switch" 3G module as VMG1312-B10A with Fwid:AAJZ0C0
10. Support characters: “@”, “-”, “.” in SIP Account field let CPE to apply.
[FEATURE MODIFIED]
1. Interface group behavior, WiFi/WAN disabled & enable still keep in original group.
(1)Create a new Interface group with WiFi interface.(2)Disable WiFi interface, then
enable. (3)The interface will restore to default group.
2. Replace CPE All 'MitraStar' string to 'ZyXEL'.
